Registration of a CCU

6 Minute Read

| How to register your CCU 

1. Launch Renatus App  
2. Select Type of Install (listed below are all the TYPES of installs you have available)
   1. Create New Site 
      • First CCU setup at a new site 
      • Building configuration 
   2. Add CCU to Existing Site 
      • Add to an existing building 
      • Site Admin credentials will be needed 
   3. Pre-Configured CCU 
      • CCU is setup by 75F prior to shipment 
      • 6 digit code provided by 75F Support team 
   4. Replace Existing CCU 
      • Replacement for damaged existing CCU 
   5. Setup Without Cloud 
      • Operate as an independent CCU 
      • Remote access and apps will not be available until CCU is registered to a site 

First time CCU registration (Create New Site)

1. Create New Site 
   1. Follow prompts to connect to Wifi 
   2. Select Create New Site  
      1. Select correct time zone 
      2. Use accurate street address 
         1. Populates exact latitude & longitude coordinates for accurate data points (weather)  

Installer Options 

1. CCU 
   1. Pairing Start address 
      1. Each CCU in the same building needs a unique address to be selected 
2. Building Temperature Limits 
   1. Master control for max/min setting, deadband, and emergency breech temperatures. Blue= Cooling Red= Heating

Note: When the Building temperature limits are modified from the master control of one CCU of a site then the same takes effect in all the other CCU's of the site.

1. Security 
   1. Password protections for zone, system, building, and setup 

Select System Profile 

1. Use drop down menu to select the system's application profile 
   1. Each system profile has its own Relay configuration based on the system design 
   2. Default system acts as a gateway without connecting to physical equipment 

1. Add Floor 
2. System Profile customization

 Pairing Process CCU to 75F equipment  

1. Add Floor name
   1. If you make a mistake, long press on the name and edit and correction will be made within back-end of system immediately 
2. Add zone name 
3. Select device type 
   1. Select Module Type 
   2. Enable/disable features as needed 

1. Follow on-screen directions of pairing steps for selected device  

 Notes to have when CCU registration is complete.

Facility Manager receives an email with invitation to Facilisight when choosing Create New site. When the facilities manager first logs into Facilisight they will be prompted for a 6 digit pin, this pin will be emailed automatically from that first login attempt. After pin is input the next screen will allow for Facility Manager to set their password.