Replace an Existing CCU in a Site – 75F Renatus

Overview

The 75F® system provides the capability to register a new CCU as a replacement CCU for a not working or a faulty CCU in a site. It is done by a code based registration, wherein a "Building Passcode" is generated from CCU and the Internal portal and the same is entered during the replacement registration process.

This activity extracts all the information and data related to the site, that faulty CCU holds and register the new replacement CCU with all that information and data.

Procedure

From the New CCU home screen.

Click CCU

The select install type screen is displayed.

Click Replace Exiting CCU option.

The Connect to Wifi screen is displayed.

Click Next.

The Replace to Existing CCU screen is displayed, with the instruction to enter the Building Passcode, and about from where the same can be generated from.

Note: The "Building Passcode" can be generated from the any other CCU in the site and the Internal Portal.

Generating Building Passcode from Exiting CCU

From the CCU Zones page.

Click the settings icon.

The Floor layout screen is displayed.

Click Settings option.

The CCU details screen is displayed, with the site and other details.

Click the question mark icon.

The screen for generating the building pass code in displayed

Click the arrow icon next to Generate Passcode.

The Building Passcode generation window is displayed.

The table below explains the fields in the screen.

Field	Description
Passcode	You can see the generated passcode.
Refresh	You can use this option to get a fresh passcode.
Email ID	You can enter a email ID where you can email the Passcode to
Validity	You can see the validity detail of the Passcode generated.

You can enter the passcode into the new CCU for Replace Existing CCU screen as below or get the passcode to the email.

Enter the email ID to get the passcode over email, and click OK

Email sent message is displayed.

You receive the passcode email as below.

Visualizing the Generated Passcode from Internal Portal for the Site

From the Internal portal home page.

Click the Menu icon.
Select Buildings.

The Buildings screen is displayed with the list of building available.

Locate the building or the site for which CCU needs to be replaced.
Click the building to view the building level details.

The Passcode generated via the CCU is displayed for reference under the building.

As done in CCU.

You can copy or note the passcode to enter into the Replace Existing CCU screen as below. You also have a refresh icon which is an option to refresh the generated pass code to new one.

Generating Passcode from Internal Portal for the Site

If the building passcode is not generated from the CCU, the same can be generated from the Internal portal.

From the buildings screen in the internal portal.

Locate the building or the site for which CCU needs to be replaced.
Click the building to view the building level details.

Click the Generate Passcode option under the building details.

Building passcode generation window pops up.

As done in CCU.

You can copy or note the passcode to enter into the Replace Existing CCU screen as below. You also have a refresh icon which is an option to refresh the generated pass code to new one.

Or you can get the passcode to the email as below.