Control Mote (CM) Board and Mounting

| Mounting the Control Mote (CM)

It's provided stiffener plate level 5’ from the floor. When using drywall anchors, drill a 5/16” hole and insert the provided anchors. Screw the CM into place on the stiffener plate using the provided #6-3/8" into the predrilled holes.

| Mounting the 75F Tablet

Be sure the power and volume buttons are facing upward. Two slots on the bottom of the tablet match two tabs on the CM plastics. Align the tabs to the slots, tilt and push back on the tablet until it clicks into place. If power is supplied to the CM and the tablet is powered on, you will see a USB icon in the upper left status bar of the tablet. The blue outline of a cloud signifies that data is being transmitted. See troubleshooting for more.