Joe Pattenaude
Articles
-
FAQ: Using a CCU To Control a Single Zone RTU
When using a CCU to control a single zone RTU, use the appropriate DAB System Profile, which may be one of the following: DAB Staged RTU w/ VFD Fan - Wiring/Configuration DAB Fully Modulating AHU -...
-
FAQ: When to use Zone Schedule vs Shared Schedule
Use a zone schedule when any desired temperature adjustments should be maintained across occupied times. Use a Shared Schedule when desired temperature adjustments should revert back to the desired...
-
Application Note: Steam Heat Exchanger Control
Solution: Using a 75F Edge 10, a steam heat exchanger can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play experience an...
-
Application Note: Controlling 2 Boilers Lead/Lag
Solution: Using a 75F Edge 10, a basic Boiler Plant can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play experience and ...
-
Application Note: Controlling a Hot Water Mixing Valve
Solution: Using a 75F Edge 10, a hot water mixing valve can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play experience ...
-
Application Note: Controlling a Condenser Loop serving Water Source Heat Pumps
Solution: Using a 75F Edge 10, a condenser loop serving WSHPs can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play exper...
-
Application Note: Controlling a Low Pressure Steam Regulating Valve
Solution: Using a 75F Edge 10, a low pressure steam regulating valve can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-pla...
-
Application Note: Pump Lead/Lag/Standby Controller
Solution: Using a 75F Edge 10, an application with three pumps can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play expe...
-
Application Note: Air Cooled Chiller Control
Solution: Using a 75F Edge 10, a basic Air Cooled Chiller Plant can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play exp...
-
Application Note: Basic Boiler Control
Solution:Using a 75F Connect Module, a basic Boiler Plant can be controlled in the form of a simple configurable controller. The Connect Module will have a predefined sequence that can be download...