Matthew Mulheran

  • Total activity 47
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 25

Activity overview

Latest activity by Matthew Mulheran
  • Matthew Mulheran created an article,

    How to enable Smart Stat fan during occupied hours.

      1. Select 'Setup'. 2. Select the zone for the Smart Stat. 3. Select the pairing address associated with the zone. 4. Toggle 'Enable FanStage1 During Occupied'.

  • Matthew Mulheran created an article,

    Upgrading to a 10-inch CCU.

      A demonstration of upgrading to the 10-inch CCU.   For wiring, please reference the CCU installation guide.

  • Matthew Mulheran created an article,

    How to manually update a 10-inch CCU

      Use the URL below once you have access to the browser.  http://updates.75fahrenheit.com/CCUV2_SN_prod_182.17.0.apk

  • Matthew Mulheran created an article,

    Managing Users in Facilisight

      1. Log in to Facilisight. 2. Select the 9 squares in the upper-right corner. 3. Select 'Manage Users'. Add User: Gives secondary Facilisight access to specified person.  This includes Facilisigh...

  • Matthew Mulheran created an article,

    Change System Mode on CCU

    1. Select 'System' in the upper-left. 2. Select either 'Off', 'Auto', 'Cool Only', or 'Heat Only'.    

  • Matthew Mulheran created an article,

    Passwords on CCU

     1. Select 'Setup' in the upper-right. 2. Select 'Settings' in the upper-left. 3. Select 'Security. 4. Enable the passwords you want to use.  Setting Changes - System mode, desired temp, schedule....

  • Matthew Mulheran created an article,

    Locating MAC & IP address on a CCU

      1. Swipe down from the upper-right corner. 2. Select 'Settings'. 3. Select 'About tablet'. 4. Select 'Status'. 5. Scroll down.

  • Matthew Mulheran created an article,

    Changing Schedule on Facilisight Mobile App

      1. Log in. 2. Select the building. 3. Select "System". 4. Select the appropriate CCU. 5. Scroll down and select the field underneath "System/Named".   6. Make the changes to each day and hit "Se...

  • Matthew Mulheran created an article,

    Changing Desired Temperature in Facilisight Mobile App

      1. Log In. 2. Select the building. 3. Select "Zones". 4. Locate the zone and select it. 5. Drag the Desired Temp slider until dialed in. - This will trigger a temporary override of the scheduled...

  • Matthew Mulheran created an article,

    Changing Desired Temperature on the User App

      1. Log In. 2. Locate the zone using the left and right arrows at the top.   3. Move desired temperature slider and release once dialed in.   The 75F User App gives you the ability to make tempo...