Mully Mulheran

  • Total activity 39
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 20

Activity overview

Latest activity by Mully Mulheran
  • Mully Mulheran created an article,

    Managing Users in Facilisight

      1. Log in to Facilisight. 2. Select the 9 squares in the upper-right corner. 3. Select 'Manage Users'. Add User: Gives secondary Facilisight access to specified person.  This includes Facilisigh...

  • Mully Mulheran created an article,

    Change System Mode on CCU

    1. Select 'System' in the upper-left. 2. Select either 'Off', 'Auto', 'Cool Only', or 'Heat Only'.    

  • Mully Mulheran created an article,

    Passwords on CCU

     1. Select 'Setup' in the upper-right. 2. Select 'Settings' in the upper-left. 3. Select 'Security. 4. Enable the passwords you want to use.  Setting Changes - System mode, desired temp, schedule....

  • Mully Mulheran created an article,

    Locating MAC & IP address on a CCU

      1. Swipe down from the upper-right corner. 2. Select 'Settings'. 3. Select 'About tablet'. 4. Select 'Status'. 5. Scroll down.

  • Mully Mulheran created an article,

    Changing Schedule on Facilisight Mobile App

      1. Log in. 2. Select the building. 3. Select "System". 4. Select the appropriate CCU. 5. Scroll down and select the field underneath "System/Named".   6. Make the changes to each day and hit "Se...

  • Mully Mulheran created an article,

    Changing Desired Temperature in Facilisight Mobile App

      1. Log In. 2. Select the building. 3. Select "Zones". 4. Locate the zone and select it. 5. Drag the Desired Temp slider until dialed in.

  • Mully Mulheran created an article,

    Changing Desired Temperature on the User App

      1. Log In. 2. Locate the zone using the left and right arrows at the top.   3. Move desired temperature slider and release once dialed in.  

  • Mully Mulheran created an article,

    Change Desired Temperature on CCU

      1. Select "Zones". 2. Locate the zone you want to change. 3. Drag the desired temperature slider to the new desired temperature.

  • Mully Mulheran created an article,

    Changing Schedule on the CCU

          1. Select "System". 2. Press the pencil icon in the upper-right corner next to "Schedule". 3. Program your start time, temperature and end time for each day. 4. Select "set".  

  • Mully Mulheran created an article,

    Changing Desired Temp & Fan Mode on Smart Stat

        1. Slide your finger Clockwise or Counterclockwise around the silver ring until desired temp is displayed. 2. To change fan mode, press the orange fan button on the lower-left corner.   3. Se...