Bhuvan p
Articles
-
Smart Node V2: Wall Sensor Communication with a 100 ft Sensor Bus Cable
| OverviewWhen using a 100 ft (30.5 m) sensor bus cable, the Smart Node V2 may not communicate reliably with the connected wall sensor. To address this, install an external 500 Ω pull-up resistor b...
-
IdroCONTROL - Hardware Overview, I/O, Wiring, and Jumper Configuration
| OverviewIdroCONTROL is a Fan Coil Unit (FCU) controller for individual zone control in commercial building applications. It supports 2-pipe and 4-pipe FCU configurations. The controller provides ...
-
HyperStat - UI Lock
| OverviewHyperStat provides three locking mechanisms to prevent unauthorized or unintended changes through the local user interface:Interactivity Lock disables all local user interaction.Installer...
-
Connect and Manage Wireless Sensors on MyStat
| OverviewMyStat uses Bluetooth Low Energy (BLE) to communicate with supported 75F wireless sensors and receive their available sensor data for supported system functions. Wireless sensors can be p...
-
Connect and Manage Wireless Sensors on SmartNode
| OverviewSmartNode uses Bluetooth Low Energy (BLE) to communicate with supported 75F wireless sensors and receive their available sensor data for supported system functions. Wireless sensors can b...
-
Connect and Manage Wireless Sensors on HyperStat Split
| OverviewHyperStat Split uses Bluetooth Low Energy (BLE) to communicate with supported 75F wireless sensors and receive their available sensor data for supported system functions. Wireless sensors...
-
Fail-Safe Operation - Single Stage Equipment (SSE)
| OverviewThe Single Stage Equipment (SSE) Fail-safe feature enables a SmartNode configured with the Single Stage Equipment (SSE) profile to continue controlling the connected HVAC equipment if com...