Joe Pattenaude
Articles
-
Application Note: Controlling 2 Boilers Lead/Lag
Solution: Using a 75F Edge 10, a basic Boiler Plant can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play experience and ...
-
Application Note: Controlling a Hot Water Mixing Valve
Solution: Using a 75F Edge 10, a hot water mixing valve can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play experience ...
-
Application Note: Controlling a Condenser Loop serving Water Source Heat Pumps
Solution: Using a 75F Edge 10, a condenser loop serving WSHPs can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play exper...
-
Application Note: Controlling a Low Pressure Steam Regulating Valve
Solution: Using a 75F Edge 10, a low pressure steam regulating valve can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-pla...
-
Application Note: Pump Lead/Lag/Standby Controller
Solution: Using a 75F Edge 10, an application with three pumps can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play expe...
-
Application Note: Air Cooled Chiller Control
Solution: Using a 75F Edge 10, a basic Air Cooled Chiller Plant can be controlled in the form of a simple configurable controller. The Edge 10 will come pre-programmed for a true plug-and-play exp...
-
Application Note: Basic Boiler Control
Solution:Using a 75F Connect Module, a basic Boiler Plant can be controlled in the form of a simple configurable controller. The Connect Module will have a predefined sequence that can be download...
-
Application Note: Controlling an AAON VCCX2 with 75F via BACNet Integration
Use Case:AAON units are often selected with the AAON VCCX2 controller. The VCCX2 does allow hardwiring of Occupancy Enable and Discharge Air Temperature Setpoint, but in applications where there a...
-
FAQ: Does 75F Require Internet to Function?
No. A 75F system will act standalone without a connection to the internet. However, you will lose the following:Remote support from 75FOver-the-Air updatesAbility to use Facilisight for remote di...
-
Troubleshooting a HyperStat That's Power Cycling
3 Minute ReadTraditional thermostats act as a relay board, only passing power through a relay to the proper relays. The displays and relays are normally powered with one or two small DC batteries....