Mahalingam Chandrasekar
Articles
-
Transmission Speed Setting in SmartNode
| Overview The 75F BMS (Building Management System) uses several sensors to sense various parameters in the building these sensors communicate the sensed information to different types of smart dev...
-
10" Iproda Tablet Features, Based on Kernel Version
2 Minute Read| OverviewBased on the year a CCU tablet was manufactured and delivered, it was built on a different kernel version.And based on the kernel version the CCU tablet was built on each tab...
-
Periodic Reboot of CCU
| Overview Periodic reboot is a feature introduced as part of the CCU developer tools set. Users can now use this feature to define a periodic interval and a time at which the CCU Tablet can reboot...
-
HyperStat as a BACnet Server
3 Minute Read| OverviewThe HyperStat is part of 75F's vertically integrated suite of intelligent building solutions, delivering multi-mode sensing, remote monitoring, and individual zone control fo...
-
Transmission Power Setting- SmartNode
3 Minute Read | Overview The 75F smart devices which are part of a BMS (Building management system) communicate with the CCU and the BMS application using various levels of bands in the 900 MHz net...
-
HyperStat as Modbus Server
4 Minute Read| OverviewThe HyperStat is part of 75F's vertically integrated suite of intelligent building solutions, delivering multi-mode sensing, remote monitoring , and individual zone control f...
-
Update Frequency Setting- SmartNode
5 Minute Read | Overview The 75F system smart devices use different types of frequencies to update the data collected to the CCU. Based on the type of frequency that is used the data update is sent...
-
Setting SmartNode for Wired Communication & Control
| Overview The SmartNode can now be wired to an external Modbus client/ BMS/ or the CCU for communication and control, and act as a server to the client in a Modbus-based BMS or an external BMS. Cu...
-
Temperature Breach Emergency Conditioning Functionality
2 Minute Read | Introduction The emergency heating or cooling that is triggered for a zone if the zone breaches the building limits. However, the resultant conditioning is always based on the mode ...
-
FAQ: How many devices can be paired per CCU?
There are a couple of factors and a calculation that contribute to defining the number of devices paired and supported by the CCU.The major factor that determines the number of devices paired and s...