Scott Dudgeon
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 9
Activity overview
Latest activity by Scott Dudgeon-
Scott Dudgeon created an article,
4 Pipe Fan Coil - Smart Stat
| How it Works A Smart Stat can be used to control a 4 Pipe Fan coil using the wiring schematic below and pairing as a 4 Pipe Fan Coil. The unit will operate as follows under standard conditions...
-
Scott Dudgeon created an article,
2 Pipe Fan Coil - Smart Stat
| How it Works A Smart Stat can be used to control a 2 Pipe Fan coil using the wiring schematic below and pairing as a 2 Pipe Fan Coil. The unit will operate as follows under standard conditions ...
-
Scott Dudgeon created an article,
Heat Pump Unit - Smart Stat
| How it Works 75F Smart Stat Heat Pump Profile allows for control of a heat pump. Cooling Mode - If the zone requires cooling then the reversing valve will move into the cooling position whethe...
-
Scott Dudgeon created an article,
Conventional Package Unit - Smart Stat
| How it Works The 75F Smart Stat Conventional Package Unit profile allows for control of a Conventional Package Unit. Cooling Mode - Stage 1 cooling will engage as soon as your current temp rise...
-
Scott Dudgeon created an article,
Troubleshooting a Smart Stat
| How to determine if a Smart Stat zone is in a dead condition and possible remedies Objective - Use Facilisight Heatmap zone condition indicators to determine if there is an issue with the data co...
-
Scott Dudgeon created an article,
Troubleshooting a Smart Node
| How to determine if a Smart Node zone has stopped communicating and possible remedies Objective - Use Facilisight Heatmap Zone condition indicators to determine if there is a communication issue ...
-
Scott Dudgeon created an article,
User and Building Limits
4 Minute Read | User and Building Limits Objective - Use the 75f tuning options to maximize comfort and economy, as well as monitor and alert you to possible issues. User Limits - A range of tempe...
-
Scott Dudgeon created an article,
Deadband and Hysteresis
| Deadband and Hysteresis (Staged Equipment) Objective - Reduce short cycling to increase energy efficiency and increase the lifespan of the equipment. Deadband- This is your desired setpoint. In ...