Scott Dudgeon
Articles
-
FAQ: How do I turn off the chime on an XR tablet?
If your XR tablet is making an intermittent chiming sound, click the volume icon at the bottom of the display: Click on the bell icon that appears:Click on the mute icon:.
-
FAQ: Fan Enable vs Fan Low Speed on a HyperStat
When configuring the relays on a HyperStat, the operation of the fan is determined by the fan setting. In the example below, Relay 3 is set to 'Fan Enable'. 'Fan Enable' tells the fan to run con...
-
FAQ: Fan Enable vs Fan Low on a CCU
When configuring the relays on a CCU, the operation of the fan is determined by the fan setting. In the example below, Relay 3 is set to 'Fan Enable'. 'Fan Enable' tells the fan to run constant...
-
Deprecated - SmartStat 4 Pipe Fan Coil
The HyperStat 4-Pipe Fan Coil Unit (4PFCU) profile replaces the earlier SmartStat 4-Pipe FCU profile and provides enhanced zone-level control for 4-pipe fan coil systems using the next-generation H...
-
Deprecated - SmartStat 2 Pipe Fan Coil
The HyperStat 2-Pipe Fan Coil Unit (2PFCU) profile replaces the earlier SmartStat 2-Pipe FCU profile and provides enhanced zone-level control for 2-pipe fan coil systems using the next-generation H...
-
Deprecated- SmartStat Heat Pump Unit
The HyperStat Heat Pump Unit (HPU) profile replaces the earlier SmartStat HPU profile and provides enhanced zone-level control for heat pump systems using the next-generation HyperStat controller.F...
-
Deprecated - Smart Stat Conventional Package Unit
2 Minute ReadThe HyperStat Conventional Package Unit (CPU) replaces the earlier SmartStat CPU profile. It provides an enhanced, next-generation zone controller for standalone rooftop units, split A...
-
Deadband and Hysteresis
2 Minute Read | Deadband and Hysteresis (Staged Equipment) Objective - Reduce short cycling to increase energy efficiency and increase the lifespan of the equipment. Deadband- This is your desired...
-
User and Building Limits
4 Minute Read| User and Building LimitsObjective - Use the 75f tuning options to maximize comfort and economy, as well as monitor and alert you to possible issues.User Limits - A range of temperatu...
-
FAQ: How can I change the Starting Pairing Address on my CCU?
If your CCU is using 10xx for its pairing addresses, but you would like to change the addresses to 20xx, for example, you will need to delete all of the modules off before you can adjust that start...