Kenny Looby

  • Total activity 25
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 14

Activity overview

Latest activity by Kenny Looby
  • Kenny Looby created an article,

    Test and Balance Guide

      For testing and balancing zone dampers in Renatus you must have the CCU connected to its docking station for damper testing to work. Without a connection to the docking station the CCU will have ...

  • Kenny Looby created an article,

    Damper Testing

      CCU: For damper testing from the CCU you must have the CCU connected to its docking station for damper testing to work. Without a connection to the docking station the CCU will have no way to tra...

  • Kenny Looby created an article,

    0-10 VDC Overview

     What is 0-10 vdc signal and what is it used for? 0-10vdc is an analog control signal used to control damper and valve actuators, VFD Control, temperature, humidity and pressure sensors, and temper...

  • Kenny Looby created an article,

    Central Control Unit (CCU) Navigation and Indicators

    Central Control Unit (CCU) Navigation and Indicators In this article we're going to identify on the screen indicators and navigation of the CCU.   What is a CCU? We have a tablet and a control mote...

  • Kenny Looby created an article,

    Humidifier or Dehumidifier Control with a CCU

        | How does it work ? Humidifier The humidifier is turned on whenever the humidity level for the system drops below the targetMinInsideHumidty set in the systems page. The humidifier will be tu...

  • Kenny Looby created an article,

    Intro to the 75F Family of Sensors

    Here at 75F we're making strides to make sensor installation as easy and clean as possible. Whether that means mounting the sensor on a beam, on a wall, or on a concrete slab, there are options ...

  • Kenny Looby created an article,

    Local Interface Sensor

    | Local Interface Sensor  The Local Interface Sensor is a room sensor and user interface. By default, it measures the temperature, humidity, and light in a zone. It can be extended to control HVAC...

  • Kenny Looby created an article,

    Wall and Wireless Wall Sensors

      | Wall Sensor The Wall Sensor adds a high precision temperature and humidity sensor that is pre calibrated from the factory. The Wall Sensor is easily mounted on a wall by a single toggle bolt....

  • Kenny Looby created an article,

    Ceiling/Flush Mount/Duct Sensors

    Ceiling/Flush Mount/Duct Sensors | Ceiling Sensor The Ceiling Sensor adds a high precision temperature and humidity sensor that is pre calibrated from the factory. The Ceiling Sensor is easily mo...

  • Kenny Looby created an article,

    Smart Stat Navigation and Indicators

    4/08/2020 Smart Stat Navigation and Indicators Home Screen Layout On the upper left corner of the Local Interface Sensor screen you will find the signal bars for the 900 MHz mesh network. If signa...