- HyperStat CPU Sequence of Operations
- HyperStat Points Exposed for BACnet
- HyperStat Conventional Package Unit (CPU)
- HyperStat 2 Pipe Fan Coil Unit (2PFCU)
- HyperStat Heat Pump Unit (HPU)
- HyperStat Monitoring Profile
- HyperStat Standalone Conventional Package Unit (CPU)
- HyperStat Standalone 2 Pipe Fan Coil Unit (2PFCU)
- HyperStat Standalone 4 Pipe Fan Coil Unit (4PFCU)
- HyperStat Standalone HPU (Heat Pump Unit)
- HyperStat as a BACnet Server
- HyperStat as Modbus Server
- HyperStat - WSHP Heat Pump
- HyperStat Split- CPU & Economizer Profile
- Application Note : Controlling an RTU with Siemens POL 220 Economizer with a Hyperstat
- Application Note : Controlling a VCCX (AAON Control Board) with the HyperStat
- Supported VRV Indoor Units (IDUs)
- Conventional Package Unit (Universal) Profile Configuration
- Application Note: Controlling an Exhaust Fan using a HyperStat
- Application Note: Condensate Pan Overflow Switch
- Application Note : Monitoring Steam Meters with a HyperStat and Weble
- Application Note: Monitoring Coolers and Freezers w/ Glycol Sensor
- Application Note: Using a Belimo Zip Economizer Controller with 75F
- Application Note: Using a Honeywell JADE W7220 Economizer Controller with 75F
- Application Note: Server Room Monitoring
- Application Note: Using Return Air for Space Temperature with HyperStat
- Application Note: Prioritizing Cooling over De-humidification on units with Hot Gas Re-Heat and no de-hum prioritization
- Application Note: Supply Air Fan Speed Control on an ERV using HyperStat Demand Control Ventilation (DCV) Damper Signal
- Application Note: Enable De-humidification on units with Hot Gas Re-Heat that requiere a simultaneous Cool call
- Application Note: Domestic Hot Water Boiler and Pump Monitoring using a HyperStat