Matt Blount

  • Total activity 161
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 84

Activity overview

Latest activity by Matt Blount
  • Matt Blount created an article,

    Precooler Control

    Below describes how 75F will control a precooler using existing control capabilities and then how we will control it with Renatus and nested logic capabilities.  Current Capabilities: Pump Runs IF:...

  • Matt Blount created an article,

    Building/ User Limits

    There are two temperature control limits that can be set during or after commissioning.  User Limits - These are used to control what the desired temperatures will be allowed to be set to controll...

  • Matt Blount created an article,

    Is My CCU Control Mote (CM or Docking Station) Working Properly?

    To determine if your CCU docking station (otherwise known as a Control Mote or CM) is functioning correctly you will need a multimeter capable of reading AC and DC voltage. You will need to test 3 ...

  • Matt Blount created an article,

    Damper Testing

    You can change damper positions from the CCU or the Smart Node for testing purposes. If testing from the CCU you must have the CCU connected to its docking station for damper testing to work. Witho...

  • Matt Blount created an article,

    Installer Options

    In the Setup > Settings menu there are installer options. Options for the installer to use for the initial system configuration. Here we will explain these options.  Pair Legacy Devices - When thi...

  • Matt Blount created an article,

    Smart Node Lighting Daylight Harvesting - Installation

  • Matt Blount created an article,

    Setting the Time Zone

    The CCU does not automatically choose the time zone. To set the time zone on your CCU follow these steps.  1. Swipe your finger down in the upper right corner of the CCU and choose Settings.  2. S...

  • Matt Blount created an article,

    Replace an Existing CCU

    If you happen to have a CCU that stops working in some way you can replace that CCU and transfer the settings to a new CCU. Every night at midnight a snapshot of your settings is taken and uploaded...

  • Matt Blount created an article,

    Mitsubishi VRF Control With Smart Stat

    75F is able to control many Mitsubishi VRF systems by using the PAC-US444CN-1 interface controller. Using the Smart Stat temperature or a remote 10K Type II thermistor the Smart Stat will control t...

  • Matt Blount created an article,

    Microtech III and the CCU

    Wiring Configuration