Mahalingam Chandrasekar
Articles
-
HyperStat Heat Pump Unit (HPU)
.12 Minute Read| OverviewThe HyperStat Heat Pump Unit (HPU) is a profile introduced by 75F to provide a zone-level control using the HyperStat thermostat. Heat pump units are used in buildings in r...
-
Setting Up the Central Plant Digital Twin
| OverviewThe Chiller plants are set up in the chiller plant builder of the 75F CPM. The chiller plant builder comes with a predefined equip component library and a canvas. The component library di...
-
Bypass Damper Using the Generic PI Loop
3 Minute Read | Overview A Bypass Damper is an additional damper used in the zones, to relieve the excess pressure on a single-stage fan. A SmartNode is used to control the damper, and a differenti...
-
August 2022 Release
| Important Enhancements and FixesPAM Dashboard Loading IssueEnhanced the PAM dashboard load speed.Messaging ServiceEnhanced messaging serviceCloud Hosting DatabaseHoste the Influx DB completely on...
-
Two Wire Multi Sensor- Installation & Initial Setup
| Overview The Multi Sensor is a sensor designed to make the 75F VAV application Title 24 Compliant. This sensor can be used to sense temperature, Humidity, CO2, and occupancy, adding IAQ and Occup...
-
Fahrenheit & Celsius- Conversion Rounding off Strategy
3 Minute Read| OverviewWith 75F's system usage globalization implemented, installers, facility managers, and users are allowed to set the preferred units for visualizing the building-level paramete...
-
HyperStat Reset, Jumper Settings & Operation
4 Minute Read | Overview Reset Button The HyperStat comes with a reset button, which the user can use to reset the device when needed A device reset can help the device recover from a malfunctionin...
-
Profiles / Applications Overview
10 Minute Read| Profiles/ApplicationsProfile/ Application is a predefined configuration generated from the Intelligence embedded algorithm, that can be preset based on available control, signal inp...
-
Schedules & Schedule States
5 Minute Read | Schedule The schedule is a concept of defining the usage of a building during the day of the week based on the occupancy of the building and determining the HVAC needs for the corre...
-
Custom Heatmap Filter
9 Minute Read | Overview The 'Custom Heatmap Filter' is a feature of 75F® system (Facilisight and Internal), which is used to apply color coded filters to zones in the heatmap based on various poin...