| Overview
The world's most intelligent thermostat HyperStat, with its eight onboard sensors to sense various parameters, is capable enough to sense and report the CO2 & Humidity, values for a room it's installed in.
With that, it provides the customer with the ability to set threshold values for the CO2 & Humidity.
And it provides the user the option to define what parameters amongst the CO2 & Humidity is to be displayed on the home screen of the HyperStat.
Along with the above-mentioned features, it is also capable to Alert the customer, when the threshold values for the CO2 are breached. The alert message is displayed for the breach on the home screen of the HyperStat.
| CO2 Threshold Setting
To set the threshold values for CO2, Humidity
From the home screen of the HyperStat
- Press the + & - buttons together to navigate to the other screens of the HyperStat
The Inputs screen is displayed initially.
- Press the next button to navigate to the HVAC options screen.
- Press the down arrow
to navigate to the options available under the screen.
- Navigate to the CO2 Threshold option.
- Press the select option to access the CO2 Threshold option.
- Press the up
or down
- Press deselect to confirm the selection.
| Alert Generation for Threshold Breaches
Once the thresholds are defined for the parameters, the HyperStat would start tracking the values sensed and displayed under the inputs screen as below.
And generates Alerts for threshold breaches as below.
| Parameter Display Setting
You can define what parameters to be displayed on the home screen of the HyperStat.
To define the parameters to be displayed on the home screen of HyperStat.
From the home screen of the HyperStat.
- Navigate to the Display Options screen next to the HVAC Options screen
- Press the down arrow
Note: At least two parameters should be set for display.
once the display parameters are set the same is displayed on the home screen of the HyperStat as below.
Comments
0 comments
Please sign in to leave a comment.