Joe Pattenaude
Articles
-
Easy Street FAQ: Zone Heating Check
| OverviewThis check verifies the heating capability of the standalone heating equipment.This check will be SKIPPED if the unit is configured for Cooling Only.| When it passes A PASS means the heat...
-
Easy Street FAQ: Zone Cooling Check
| OverviewThis check verifies the cooling capability of the standalone cooling equipment.This check will be SKIPPED if any of the following is true:The outdoor-air temps are too low (below 50F): th...
-
Easy Street FAQ: Zone Damper Check
| OverviewThis check verifies the zone damper operation in multi-zone configurations. This is achieved by modulating the zone dampers while conditioning the zones, and inspecting the discharge-air ...
-
Easy Street FAQ: Zone Reheat Check
| OverviewThis check verifies the reheat functionality of VAV terminal units.| When it passes A PASS means the zone's reheat is operational, and that the unit was able to adequately warm up the zon...
-
Easy Street FAQ: AHU Cooling Check
| OverviewThis check verifies the cooling capability of the central Air-Handler Unit (AHU).This check will be SKIPPED if any of the following is true:The outdoor-air temps are too low (below 50F): ...
-
Easy Street FAQ: Zone SAT & DAT Reporting Check
| OverviewThese checks verify the health of the following airflow sensors:Zone discharge air temp (DAT)Supply air temp (SAT)| When it passes A PASS means the CCU's airflow sensor is working correct...
-
Easy Street FAQ: CCU Backup Temperature Sensor Check
| OverviewThis check verifies the CCU's built-in temperature sensor.| When it passes A PASS means the CCU's temp sensor is working correctly and reading within acceptable ranges when compared to th...
-
Easy Street FAQ: Zone Actuator & Stroke Feedback Check
| OverviewThis check runs on the following zones with dampers:VAVDABBypassModulating reheat actuator| When it passes A PASS means your zones' damper actuators are working correctly and responding t...
-
Easy Street FAQ: Zone CO2 Reporting Check
| OverviewThis check verifies the zone CO2 sensor quality on your SmartNodes and HyperStats.| When it passes A PASS means your zones' CO2 sensors are working correctly and reading within acceptable...
-
Easy Street FAQ: CCU Tablet Power Check
| OverviewThis check verifies CCU's battery level and ensures the available capacity has not decreased significantly. Action: Confirm the CCU was not undocked for testing and check power ratings ...